Safety 1st Guide 65 (RF)
|Manufacturer / Model Name||Safety 1st Guide 65|
|Model Number / Manufacture Date||CC078-BJB / May 9, 2012|
|Weight / Height||5lb - 40lb / 19" - 40"|
|Evaluation of Labels||
There is no picture of a child in the child restraint on the labels. No additional harness slot height adjustment information is given on the labels.
|Evaluation of Instructions||
The manual was not attached to the restraint and was found loose in the packaging. The manual storage may be difficult to find. No full picture exists of a properly restrained child in the restraint in the owner's manual.
|Securing the Child||
The restraint was not set for the smallest possible occupant. There is a head hugger or body pillow blocking the harness slots in the shell from being easily visible. The harness must be rethreaded to adjust height for the child's growth. Multiple actions are required to convert the seat to this mode of use, but the operations are simple. The LATCH belt must be rerouted to convert the restraint to this mode of use from another mode. The harness must be taken out and rethreaded when cleaning the restraint. When disassembled for cleaning, mandatory parts of the restraint become detached and could be misplaced.
It may be uncomfortable for larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the belt routing system. A printed/molded line is present on the restraint that must be leveled to the ground. There are not three levels of built-in recline available. The restraint is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The LATCH storage area is not clearly labeled.
|Overall Ease of Use Rating||